Guide

    Mould Risk in Commercial Buildings: Prevention, Assessment, and Remediation

    How to identify, assess, and manage mould risk in commercial buildings — from early detection to post-remediation verification.

    30 March 20261 min read
    Last reviewed:

    Why Mould Matters in Commercial Settings

    Mould in commercial buildings is more than a cosmetic issue. Fungal spores can trigger respiratory symptoms, exacerbate asthma, and in severe cases cause allergic reactions. For building operators and facilities managers, unmanaged mould presents health liability, compliance risk, and reputational damage.

    Common Causes

    Mould growth requires moisture. In commercial buildings, the most frequent sources include:

    • Condensation from poor thermal performance or inadequate ventilation
    • Water ingress through roof, facade, or plumbing failures
    • Humidity levels above 60% RH sustained over time
    • Blocked or ineffective extract ventilation in wet areas
    • Concealed growth behind wall linings, above suspended ceilings, or within HVAC systems

    Assessment Approach

    Green Air Monitoring conducts structured mould assessments that go beyond visual inspection:

    • Environmental monitoring — temperature, humidity, and dew point mapping to identify condensation risk zones
    • Air sampling — fungal spore counts compared against background levels and published guidance
    • Surface sampling — tape lifts and swabs to identify genus and assess contamination severity
    • Moisture mapping — identifying the moisture source driving growth

    Post-Remediation Verification

    After remediation works, we provide clearance testing to verify that spore levels have returned to acceptable background concentrations — giving building operators documented evidence that the issue has been resolved.

    mouldassessmentremediationcommercial-buildings

    Related Resources

    Guide

    When Smoke Outlasts the Fire: A UK Perspective on Persistent Air Pollution

    Researchers at Bristol have found that a pollutant in wildfire smoke can resist being broken down by sunlight. That challenges the idea that smoke clears as soon as the fire is out. This article explains what the study does and doesn’t show. It also covers how UK organisations can prepare for smoke incidents, read air quality information correctly and scope indoor air quality assessments so they answer the questions that remain.

    Guide

    After the Cooking Stops: The Air Quality Question Facing UK Kitchens

    Cooking ends at a recognisable moment, but the airborne material it produces may not behave so simply. Recent research led by the University of Birmingham shows that cooking-related aerosols can behave in unexpected ways. It doesn’t set a clearance time for working kitchens, but it does raise a practical question for UK building managers. Does your kitchen assessment cover the whole cooking event? That means conditions before preparation, during service and after the heat is turned off, including any effect on neighbouring spaces and the staff who stay behind to clean and close.

    Guide

    Beyond the Hearth: What Birmingham’s Wood-Smoke Research Means for UK Buildings

    Wood burning remains an important part of the air pollution picture in Birmingham, with implications that extend beyond the homes where fires are lit. Research highlighted by the University of Birmingham in December 2024 offers a useful starting point for a wider question: how should the people responsible for UK buildings investigate fine particles arriving from outside?

    Need Indoor Air Quality Testing?

    Get a no-obligation quote. We provide IAQ testing, ventilation assessment and environmental monitoring across London and the South East.

    We use cookies to measure how our site and adverts perform. You can accept or reject non-essential cookies. Privacy policy